[1]
Fucai Li, Haikuo Peng, Guang Meng. Quantitative damage image construction in
plate structures using a circular PZT array and Lamb wave, Sensors and
Actuators A: Physical, 2014,214: 66-73.
[2] Fucai Li, Zhiqiang Liu, Xuewei Sun, Hongguang Li, Guang
Meng. Propagation of guided wave in pressure vessel, Wave Motion, 2015,52:
216-228.
[3] 李明，李富才，李鸿光，孟光. 浅裂纹转子特性的动态圣维南原理解释, 上海交通大学学报, 2014, 48(6): 870-876.
[4] 耿富礼，李富才，孟光. 二维全息谱在旋转机械故障诊断中的应用, 机械科学与技术, 2014, 33(10): 1445-1449.
[5] 耿富礼，李富才，孟光. 通用机械设备维护与节能, 机械科学与技术, 2014, 30(1): 159-164.
[6] 耿富礼，李富才，孟光. 利用 VS． NET 的全息谱分析及其在旋转机械故障诊断中的应用研究, 现代制造工程, 2014, 8: 135-139.
[7] 孔铭，李富才，周利民. 应用兰姆波测定材料弹性参数的反演方法, 噪声与振动控制, 2014, 34(5): 228-233.
[8]
Ming Li, Fucai Li, Beibei Jing, Huiyu Bai, Hongguang Li, Guang Meng.
Multi-fault diagnosis of rotor system based on differential-based empirical
mode decomposition, Journal of Vibration and Control, DOI:
10.1177/1077546313502505.
[9] Ming Li, Yu Wang, Fucai Li, Hongguang Li, Guang Meng. Modelica-based
object-orient modeling of rotor system with multi-faults, Chinese Journal of
Mechanical Engineering, 2013, 26, 6: 1169-1181.
[10] Zhenghao Sun, Fucai Li, Hongguang Li. A numerical study
of non-collinear mixing of three-dimensional nonlinear waves in an elastic
half-space, Proceedings of Meetings on Acoustics, 2013, Vol. 19, 030068.
[11] 李富才，苗晓婷，孙学伟，李鸿光，孟光. 基于导波的圆柱结构损伤识别方法, 机械工程学报, 2013, Vol. 49, No. 6: 52-59.
[12] 王金福，李富才. 机械故障诊断的信号处理方法：频域分析, 噪声与振动控制, 2013, 33(1): 173-180.
[13] 王金福，李富才. 机械故障诊断技术中的信号处理方法：时域分析, 噪声与振动控制, 2013, 33(2): 128-132.
[14] 王金福，李富才. 机械故障诊断技术中的信号处理方法：时频分析, 噪声与振动控制, 2013, 33(3): 198-202.
[15]
Fucai Li, Haikuo Peng, Xuewei Sun, Jinfu Wang, Guang Meng. Wave propagation
analysis in composite laminates containing a delamination using a
three-dimensional spectral element method. Mathematical Problems in
Engineering, 2012, Article ID 659849, 19 pages.
[16] Xiaoting Miao, Fucai Li*, Lin Ye, Xuewei Sun, Ye Lu. A
Split Spectrum Processing of Noise-contaminated Wave Signals for Damage
Detection. Smart Structures and Systems, 2012, V10(3): 253-270, 2012.
[17] 李富才，彭海阔，孙学伟，王金福，孟光. 基于谱元法的板结构中导波传播机理与损伤识别研究. 机械工程学报, 2012, 48(21): 57-66.
[18] 孙学伟，李富才*，苗晓婷，孟光，周利民. 厚梁结构中的超声导波传播与损伤识别. 机械工程学报, 2012, 48(14): 1-10.
[19] 苗晓婷，李富才*，孟光. 分谱处理算法在基于超声导波损伤识别中的应用. 振动与冲击, 2012, 31(1): 5-10.
[20]
Haikuo Peng, Lin Ye, Guang Meng, Fucai Li. Characteristics of elastic wave
propagation in thick beams - when guided waves prevail? Journal of Theoretical
and Applied Mechanics. 2011, 49(3): 807-823
[21] 苗晓婷，李富才，孟光. 结合时间逆转的兰姆波与加权分布成像算法对多损伤识别的研究. 机械工程学报, 2011, 47(16): 1-8
[22] Xiaoting Miao, DongWang, Lin Ye, Ye Lu, Fucai Li, Guang
Meng. Identification of dual notches based on time-reversal lamb waves and a
damage diagnostic imaging algorithm. Journal of Intelligent Material Systems
and Structures. 2011, 22(17): 1983–1992
[23] Dong Wang, Lin Ye, Ye Lu and Fucai Li. A damage
diagnostic imaging algorithm based on the quantitative comparison of Lamb wave
signals. Smart Materials and Structures, 2010, 19: 065008(12pp)
[24] Haikuo Peng, Lin Ye, Guang Meng, Fucai Li. Concise
analysis of wave propagation using the spectral element method and
identification of delamination in CF/EP composite beams. Smart Materials and
Structures. 2010, 19: 085018(11pp)
[25] 李富才，孟光，胥永刚. 基于多尺度峭度指标的损伤识别研究，振动与冲击，2010, 29(S): 76-78
[26] Fucai Li, Hideaki Murayama, Kazuro Kageyama, Guang Meng,
Isamu Ohsawa and Takehiro Shirai. Debonding detection using self-calibration
sensor network. Smart Materials and Structures, 2010, 19(6): 065007.
[27] Kai Sun, Guang Meng, Fucai Li, Lin Ye and Ye Lu. Damage
identification in thick steel beam based on guided ultrasonic waves, Journal of
Intelligent Material Systems and Structures. 2010, 21(3): 225-232.
[28] Dong Wang, Lin Ye, Zhongqing Su, Ye Lu, Fucai Li and
Guang Meng. Probabilistic damage identification based on correlation analysis
using guided wave signals in aluminum plates, Structural Health Monitoring.
2010, 9(2), 133-144.
[29] Fucai Li, Hideaki Murayama, Kazuro Kageyama and Isamu
Ohsawa. Multiple damage assessment in composite laminates using a
Doppler-effect-based fiber-optic sensor, Measurement Science and Technology.
2009, 20, 115109.
[30] Fucai Li, Guang Meng, Lin Ye, Ye Lu and Kazuro Kageyama.
Dispersion analysis of Lamb waves and damage detection for aluminum structures
using ridge in the time-scale domain, Measurement Science and Technology, 2009,
20, 095704.
[31] Fucai Li, Hideaki Murayama, Kazuro Kageyama and
Takeshiro Shirai. Guided wave and damage detection in composite laminates using
different fiber optic sensors, Sensors, 2009, 9, 4005-4021.
[32] Fucai Li, Hideaki Murayama, Kazuro Kageyama and
Takeshiro Shirai. Doppler effect-based fiber-optic sensor and its application
in ultrasonic detection. Optical Fiber Technology, 2009, 15, 296-303.
[33] Fucai Li, Guang Meng, Kazuro Kageyama, Zhongqing Su and
Lin Ye. Optimal mother wavelet selection of Lamb wave analyses. Journal of
Intelligent Material Systems and Structures, 2009, 20, 1147-1161.
[34] Haikuo Peng, Guang Meng and Fucai Li. Modeling of wave
propagation in plate structures using three-dimensional spectral element method
for damage detection. Journal of Sound and Vibration. 2009, 320, 942-954.
[35] Fucai Li, Kazuro Kageyama, Hideaki Murayama, Kiyoshi
Uzawa and Isama Ohsawa. Multiple damage identification in CFRP laminates with
delaminations using fiber optic sensors, Proceedings of the 7th International
workshop on Structural Health Monitoring, Stanford University, CA USA, Sep.
9-11, 2009.
[36] Fucai Li, Kazuro Kageyama, Hideaki Murayama and Isamu
Ohsawa. Delamination detection in CFRP laminates using FOD sensor, Proc. SPIE,
2009, vol. 7493.
[37] Kai Sun, Guang Meng, Fucai Li, Lin Ye and Ye Lu. Fatigue
crack identification in thick steel beam using guided waves, Proceedings of the
7th International workshop on Structural Health Monitoring, Stanford
University, CA USA, Sep. 9-11, 2009.
[38] Fucai Li and Guang Meng. Dispersion analysis of Lamb
waves with narrow frequency bands. ACTA Physica Sinica. 2008, 57, 4265-4272.
[39] Fucai Li, Guang Meng, Lin Ye and Peng Chen. Wavelet
transform-based higher-order statistics for fault diagnosis in rolling element
bearings. Journal of Vibration and Control. 2008, 14, 1691-1709.
[40] Fucai Li, Kazuro Kageyama, Hideaki Murayama, Guang Meng
and Lin Ye. Entropy-based optimal mother wavelet selection for digital damage
fingerprints (DDF). Proceeding of the Fifth International Symposium on Neural
Networks. September 24-28, 2008, Beijing, China.
[41] Fucai Li, Hideaki Murayama, Kazuro Kageyama. Structural health
monitoring for composite laminates using optimal mother wavelet-based method.
Proceeding of the 8th China-Japan Joint Conference on Composites. October
27-29, 2008, Sapporo, Japan.
[42] Xi Lu, Fucai Li, Guang Meng, Lin Ye and Ye Lu. Lamb wave
based damage identification in structures with complex geometry. Proceedings of
ASME Conference on Smart Materials, Adaptive Structures and Intelligent
Systems. October 28-30, 2008, Ellicott City, Maryland, USA.
[43] Kai Sun, Guang Meng, Fucai Li, Lin Ye and Ye Lu. Damage
detection in thick steel beam using Lamb waves. Proceedings of ASME Conference
on Smart Materials, Adaptive Structures and Intelligent Systems. October 28-30,
2008, Ellicott City, Maryland, USA.
[44] Dong Wang, Lin Ye, Ye Lu and Fucai Li. Diagnosis of
damage presence using tomographically constructed probability distribution
based on Lamb wave signals. Proceedings of the Fourth European Workshop on
Structural Health Monitoring. July 2-4, 2008, Krakow, Poland
[45] Fucai Li and Guang Meng. Optimal mother wavelet-based
Lamb wave analyses and damage detection for composite structures (in English).
Chinese Journal of Scientific Instrument. 2007, 28, 1729-1735.
[46] Fucai Li, Lin Ye, Guicai Zhang and Guang Meng. Bearing
fault detection using higher-order statistics based ARMA model. Key Engineering
Materials. 2007, 347, 271-276.
[47] Fucai Li, Lin Ye, Guicai Zhang and Guang Meng. Wavelet
packet transform based frequency domain kurtosis for fault diagnosis in rolling
element bearings. Key Engineering Materials. 2007, 347, 705-710.
[48] Fucai Li, Zhongqing Su, Lin Ye and Guang Meng. A
correlation filtering-based matching pursuit (CF-MP) for damage identification
using Lamb waves. Smart Materials and Structures. 2006, 15, 1585-1594.
[49] Xing Wu, Jin Chen, Ruqiang Li and Fucai Li. Web-based
remote monitoring and fault diagnosis system. International Journal of Advanced
manufacturing Technology. 2006, 28, 162-175.
[50] Fucai Li, Jin Chen, Guicai Zhang, Wavelet transform
domain filter and its application in incipient fault prognosis. Key Engineering
Materials. 2005, 293-294, 127-134.
[51] 李富才，何正嘉，陈进. 小波域相关滤波法及其早期故障预示应用. 振动工程学报. 2005, 18, 145-148.
[52] Guicai Zhang, Jin Chen and Fucai Li. Extracting gear
fault features using maximal bispectrum. Key Engineering Materials. 2005,
293-294: 167-174.
[53] 彭海阔，孟光，李富才. 一种基于压电晶片阵列的板结构损伤识别方法. 振动与冲击. 2009, 28(9): 56-59.（EI收录）
[54] 孙凯，孟光，李富才，叶林. 基于弹性导波的厚梁结构的损伤检测. 振动与冲击. 2009, 28(12): 110-113.（EI收录）