[1]Xinhua Long, Dehao Meng, Yingang Chai. Effects of spindle speed-dependent dynamic characteristics of ball bearing and multi-modes on the stability of milling process. Meccanica, 2015
[2]Xinhua Long, Miao Yu. One to One Nonlinear Internal Resonance of Sensor Diaphragm Under Initial Tension. Journal of Vibration and Acoustics, 2015, 137(3)
[3]Xianbo Liu, Nicholas Vlajic, Xinhua Long, Guang Meng, Balakumar Balachandran. Multiple regenerative effects in cutting process and nonlinear oscillations. International Journal of Dynamics and Control, 2014, 2(1): 86-101)
[4]Xinhua Long, Hao Jiang, Guang Meng. Active vibration control for peripheral milling process. Journal of Materials Processing Technology, 2013, 213(5): 660-670.
[5]Xianbo Liu, Nicholas Vlajic, Xinhua Long, Guang Meng, Balakumar Balachandran. Coupled axial-torsional dynamics in rotary drilling with state-dependent delay: stability and control. Nonlinear Dynamics, 2014, 78(3): 1891-1906.
[6]Xinhua Long, Jiabin Liu,Guang Ment. Nonlinear dynamics of two harmonically excited elastic structures with impact interaction. Journal of Sound and Vibration,2014, 333(5)：1430-1441. [7]Xianbo Liu, Nicholas Vlajic, Xinhua Long, Guang Meng, Balakumar Balachandran. Nonlinear motions of a flexible rotor with a drill bit: stick-slip and delay effects. Nonlinear Dynamics, 2013, 72(1-2): 61-77
[8]Xianbo Liu, Nicholas Vlajic, Xinhua Long, Guang Meng. State-dependent delay Influenced Drill-String Oscillations and Stability Analysis. Journal of Vibration and Acoustics,2014, 136(5)
[9]Long, X.-H. and Balachandran, B., “Stability Analysis for Milling Process,” Nonlinear Dynamics, Vol. 49, 2007 p. 349-359
[10]Long, X.-H., Balachandran, B., and Mann, B.P., “Dynamics of Milling Model with Variable Time Delay,” Nonlinear Dynamics, vol. 47(2007) p. 47-63.
[11]Long, X.-H., Lin, G. J., and Balachandran, B., “Grazing Bifurcations in Elastic Structure Excited by Harmonic Impactor Motions”, Physica D. Vol. 237(2008) p. 1129-1138.
[12]Long, X.-H. and Balachandran, B., “Stability of Up-Milling and Down-Milling Processes with Variable Spindle Speed,” Journal of Vibration and Control , 2010.
[13]Xinhua Long, Hao Jiang,Guang Meng,"Active vibration control for peripheral milling processes,"Journal of Materials Processing Technology Vol.213（2013）， No.5, pp.660-670.
[14]Xinhua Long， Jiabin Liu, Guang Meng,"Nonlinear dynamics of two harmonically excited elastic structures with impact interaction,"Journal of Sound and Vibration, Vol. 333, 2014, pp. 1430–1441.
[15]Yu, Miao, Long, X.-H., and Balachandran, B., “Sensor Diaphragm under Initial Tension: Nonlinear Responses and Design Implications,” Journal of Sound and Vibration, Vol. 312, p. 39-54.
[16]Jiang, H, Long, X.-H., and G, Meng. “Study of the correlation between surface generation and cutting vibrations in peripheral milling,” Journal of Materials Processing Technology, Vol. 208, p. 229-238..
[17]Gao S.-H., Long, X.-H., and G, Meng., “Nonlinear Response and Nonsmooth Bifurcations of an Unbalanced Machine-Tool Spindle-Bearing System,” Nonlinear Dynamics, Vol. 54, p.365-377.
[18]Long, X.-H., Insperger, T., and Balachandran, B., ”Systems with Periodic Coefficients and Periodically Varying Delays: Semi-Discretization Based Stability Analysis” in, book ”Delay Differential Equations: Recent Advances and New Directions”，2009.
[19]Gao S.-H., Long, X.-H., and G, Meng., “Sub-harmonic resonance and nonlinear behavior of a spindle ball bearings system with 3/2 nonlinear,”. International Journal of Nonlinear Sciences and Numerical Simulation, 2009
[20]Gao S.-H., Long, X.-H., and G, Meng.,” Nonlinear response and stability of a spindle system supported by ball bearings”, Archive of Applied Mechanics, 2010.
[21]S.-H. Gao, G. Meng, X.-H. Long. Stability prediction in high speed milling including the thermal preload effects of bearing. Proceedings of the Institution of Mechanical Engineers, Part E, Journal of Process Mechanical Engineering. 2010
[22]Long, X.-H. and Balachandran, B., “Stability Analysis of A Variable Spindle Speed Milling Process,” Proceedings of IDETC’05 ASME 2005, September 23-28, 2005, Long Beach, CA, USA
[23]Long, X.-H. and Balachandran, B., “Elastic Structure Excited by Harmonic Impactor Motions: Experimental and Numerical Investigations,” ENOC-2005, August 7-12, 2005, Eindhoven, Netherlands
[24]Long, X.-H. and Balachandran, B., “Milling Model with Variable Time Delay,” Proceedings of IMECE’04, ASME 2004.
[25]Jiang, H, Long, X.-H., and G, Meng. “Active control on milling processes,” Proceedings of IMECE’2010, ASME 2010
[26]江浩、龙新华、孟光，“铣削主动减振平台设计及控制”，上海交通大学学报，第42卷第5期，2008年5月，pp. 724-729
[27]江浩、龙新华、孟光，“侧铣加工振动与表面轮廓形成”，上海交通大学学报，第42卷第5期，2008年5月，pp. 730-734
[28]张伟刚、高尚晗、龙新华、孟光，“机床主轴-滚动轴承系统非线性动力学分析”，振动与冲击，第27卷第9期，2008年9月，pp. 72-75
[29]李中伟、龙新华、孟光，“基于Magnus-Gaussian截断的铣削系统稳定性的半离散分析法 ”，振动与冲击
[30]高尚晗、龙新华、孟光，“主轴-滚动轴承系统三种分岔形式 ”，振动与冲击